Name: 9th International Workshop on Numerical Modelling of High Temperature Superconductors - HTS 2024
Start: 2024-06-10T09:40:00+02:00
End: 2024-06-13T16:00:00+02:00
Location: Parkhotel Bad Zurzach, Switzerland

9th International Workshop on Numerical Modelling of High Temperature Superconductors - HTS 2024

from Monday, 10 June 2024 (09:40) to Thursday, 13 June 2024 (16:00)

Monday, 10 June 2024

18:00 Welcome Apero and Workshop Registration
Welcome Apero and Workshop Registration
18:00 - 20:00
Tuesday, 11 June 2024

08:00 Workshop Registration
Workshop Registration
08:00 - 08:30
08:30 Workshop Introduction - Stephane Sanfilippo (PSI - Paul Scherrer Institut)
Workshop Introduction
- Stephane Sanfilippo (PSI - Paul Scherrer Institut)
08:30 - 08:45
08:45 A
A
08:45 - 09:45
Contributions

08:45 Numerical Considerations for Coupled Magneto-thermal FE Models of HTS Tapes - Louis Denis (University of Liege)

09:15 Voltage signals on terminations of an HTS magnet modelled in T-A formulation - Fedor Gömöry (Institute of Electrical Engineering, Slovak Academy of Sciences)
09:45 Coffee Break
Coffee Break
09:45 - 10:15
10:15 B
B
10:15 - 12:00
Contributions

10:15 Modelling the behavior of HTS coils under overcurrent conditions - Gabriel Hajiri (Université de Lorraine - GREEN)

10:35 3D thermal-hydraulic and electric modelling of quench propagation in HTS conductors for fusion - Andrea Zappatore (Politecnico di Torino)

10:55 Critical current numerical characterization of 6-layers CORC® cables - Sofia Viarengo (Politecnico di Torino, Turin, Italy)

11:15 The role of ferromagnet to prevent the flux-jump occurrence: a numerical study - Michela Fracasso (Politecnico di Torino)

11:35 Impact of porosity on trapped magnetic field and mechanical stresses in HTS bulks during PFM - Santiago Guijosa Guadarrama (GREEN-University of Lorraine)
12:00 Lunch break
Lunch break
12:00 - 13:30
13:30 C
C
13:30 - 14:00
Contributions

13:30 Multi-physics modeling of metal-insulated REBCO magnets with screening currents - Enric Pardo (Institute of Electrical Engineering, SAS)
14:00 A
A
14:00 - 15:00
Contributions

14:00 Modelling a single-layer CORT cable with coordinate transformation - Benoît Vanderheyden (University of Liège, Belgium)

14:20 A frequency domain finite element model for simulating high temperature superconductors using the J-A and T-A formulations - Frederic Trillaud (Universidad Nacional Autónoma de Mexico) Gabriel dos Santos (Electrical Engineering Department, Rio de Janeiro State University)

14:40 Influence of ferromagnetic structure addition on the field trapping ability of MgB2 bulk samples - Laura Gozzelino (Politecnico di Torino)
15:00 Coffee Break
Coffee Break
15:00 - 15:30
15:30 B
B
15:30 - 17:00
Contributions

15:30 Recent Advances in BELFEM and Toward a Community-Driven Material Database for HTS Modeling - Christian Messe (Berkeley Lab)

16:00 Electrothermal modeling of HTS coils using homogenization and different formulations - Anang Dadhich (Institute of Electrical Engineering, Slovak Academy of Sciences)

16:20 H-phi Simulations for Pre-Quench and Minimum Quench Energy in HTS Tapes - Gregory Giard (Polytechnique Montreal)

16:40 Lumped Parameter Model for Simulation of HTS Cables in Power System Simulators - Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology)
19:00 Dinner
Dinner
19:00 - 20:30
Wednesday, 12 June 2024

08:15 Transfer to the Paul Scherrer Institute by bus
Transfer to the Paul Scherrer Institute by bus
08:15 - 08:45
09:00
09:00 - 10:20
Contributions

09:00 Implementing user-defined superconductivity formulations with the COMSOL Multiphysics® software in an efficient and reusable way - Sven Friedel (COMSOL Multiphyiscs GmbH)

09:20 Renaissance Fusion - Diego Pereira Lucas Blattner

09:40 Sigmaphi - Emmanuel Voisin

10:00 Fast and scalable Superconductor simulations in the cloud with Quanscient Allsolve - Janne Ruuskanen (Quanscient Oy) Valtteri Lahtinen (Quanscient Oy)
10:20 Coffee Break
Coffee Break
10:20 - 10:40
10:40
10:40 - 12:10
Contributions

10:40 Mechanical-electric behaviors of CORC cable under different deformation modes - Yuanwen Gao (Lanzhou University)

10:40 3D Modelling and Magnetization Losses in CORC-TSTC hybrid composite conductors - Hasan Al-ssalih (University of Liecester)

10:40 Stress, strain and mechanical analyses of REBCO superconducting tapes using finite element method. - Luca Benedetti (ICMAB)

10:40 Study of a New Axial-Field Superconductor Inductor for a Synchronous Machine - hakim douar (Université des Sciences et de la Technologie Houari Boumediene Algérie)

10:40 HTS superconducting magnetic energy storage (SMES) for waterborne applications - Carlos Gil Boronat

10:40 Study on stability of high temperature superconducting magnet in fusion reactor under nuclear heat condition - Jinxing Zheng (Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences)

11:00 Magnetic field stability of a HTS insert large-scale prototype for a future 33 T CSM magnet - Alexandre ZAMPA (Tohoku University)

11:00 Electromagnetic-mechanical simulation of screening current, field, strain, and voltage - JESEOK BANG

11:00 Research on the dynamic multi-heat load coupling calculation method for fusion superconducting magnets - Yudong Lu

11:00 Homogenization of HTS Coils and Stacks Using the Foil Conductor Model - Elias Paakkunainen (TU Darmstadt)

11:20 Improvements of Partial Element Equivalent Circuit model of High-field HTS coils - Nikola Jerance (CEA Paris Saclay)

11:20 Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil - Cun Xue (Northwestern Polytechnical University)

11:20 Modelling of Electrical, Magnetic and Thermal Issues for a Non-Insulated HTS-CCT Dipole Magnet - Rui Kang (Institute of High Energy Physics, Chinese Academy of Sciences)

11:20 Modeling an HTS Cable with a Superconducting Fault Current Limiter in MATLAB/SIMULINK for Integrating in Electric Aircraft - Ali Khonya (Karlsruhe Institute of Technology (KIT))

11:40 The development of multi-scale method for simulating large-scale REBCO-based coils - Lei Wang (Institute of Plasma Physics, Chinese Academy of Sciences)

11:40 Evaluation of techno-economic aspects of HTS HVAC Transmission Cables by Critical Current Grading Across Phases - Gabriele Fornasier (Ricerca sul Sistema Energetico - RSE S.p.A.)

11:40 3-D modelling and experimental results of a sorted bulk staggered array undulator - Alexandre Arsenault (PSI - Paul Scherrer Institut)

11:40 Design, construction and test in SULTAN of high-current ReBCO racetrack coil - Nikolay Bykovskiy (EPFL SPC)

11:40 Understanding AC Losses in state-of-the-art superconducting cables: Physics Insights from 2D to 3D computational modelling - Harold Ruiz (University of Leicester)
12:10 Lunch Break
Lunch Break
12:10 - 13:30
13:30 C
C
13:30 - 14:30
Contributions

13:30 Introduction of the magnetic scalar potential $\phi$ in the T-A and J-A formulations for efficient electromagnetic simulations of High Temperature Superconductors - Gabriel dos Santos (State University of Rio de Janeiro) Frederic Trillaud (Universidad Nacional Autónoma de Mexico)

14:00 A physic-guided recurrent machine learning model for long-time prediction of quench dynamics - Frédéric Sirois (Polytechnique Montreal) Nicolas Breault (Polytechnique Montréal)
14:30 Overview of the Paul Scherrer Institute - Hans Braun (Paul Scherrer Institute (PSI))
Overview of the Paul Scherrer Institute
- Hans Braun (Paul Scherrer Institute (PSI))
14:30 - 15:00
15:00 Coffee Break
Coffee Break
15:00 - 15:20
15:20 A
A
15:20 - 16:40
Contributions

15:20 How to increase the field gradient produced by a superconducting Halbach array by modifying its geometric parameters? - Philippe Vanderbemden (University of Liege)

15:40 Hybrid superconducting screens combining disk-shaped bulks and closed-loop coated conductors: modelling and experimental validation - Nicolas Rotheudt (University of Liège)

16:00 A parameter-free reconstruction of HTS critical current magnetic field - angular dependency with sparse measurements - Paweł Lasek (Silesian University of Technology)

16:20 Multi-physics considerations of NI HTS Solenoid for PSI Positron Production Experiment - Jaap Kosse (PSI - Paul Scherrer Institut)
16:40 Visit PSI labs
Visit PSI labs
16:40 - 18:40

18:40 Transfer to Habsburg Castle by bus
Transfer to Habsburg Castle by bus
18:40 - 19:10

19:10 HTS2024 Social Dinner
HTS2024 Social Dinner
19:10 - 22:00

22:00 Transfer to Bad Zurzach by bus
Transfer to Bad Zurzach by bus
22:00 - 22:30
Thursday, 13 June 2024
09:00 B
B
09:00 - 10:20
Contributions

09:00 Computing Hysteresis and Coupling AC losses in round cable made from filamented HTS tapes - Mykola Soloviov (Institute of Electrical Engineering, Slovak Academy of Sciences (SAS))

09:20 Design Optimization of Ferromagnetic Poles for a High Temperature Superconducting Bulk Undulator - Carlos Gafa (PSI - Paul Scherrer Institut)

09:40 Coupled Axial and Transverse Currents Method for Periodic Superconductors Modelling - Julien Dular (CERN)

10:00 2D FEM electro-magnetic modelling of straight soldered ReBCO stack cable in high magnetic field - Dmitry Sotnikov (PSI - Paul Scherrer Institut)
10:20 Coffee Break & Group Photo
Coffee Break & Group Photo
10:20 - 11:00
11:00 C
C
11:00 - 11:40
Contributions

11:00 Predicting the behavior of insulated REBCO coils up to their operation limit to identify safe operation domain - arnaud badel (Université Grenoble Alpes - CNRS)

11:20 High Temperature Superconducting Coating for the Beam Screen of the Future Circular Collider - Guilherme Telles (Institut de Ciència de Materials de Barcelona (ICMAB - CSIC))
11:40 Summary, awards, conclusion -End of the workshop
Summary, awards, conclusion -End of the workshop
11:40 - 12:40

12:40 Final Lunch (sandwiches)
Final Lunch (sandwiches)
12:40 - 13:10