DENIM 2018

16 Sept 2018, 14:00 → 9 Nov 2018, 23:59 Europe/Zurich

WHGA/001 Auditorium (Paul Scherrer Institut)

We are pleased to announce that the 7th Design and Engineering of Neutron Instruments meeting will be held at PSI, Switzerland, from September 16 to 19, 2018. This will prove to be an essential conference for all engineers and technicians interested in the project management, design, specification, fabrication, acceptance testing, operation maintenance and upgrades of neutron scattering instruments. We look forward to seeing you in the heart of Europe next autumn.

Flyer

Sunday 16 September

19:00 → 21:00 Registration / Welcome Aperitif

Convener: Mr Peter Keller

Monday 17 September

07:30 → 08:00 Shuttle bus from Bad Zurzach

Shuttle Zurzach -> PSI

08:00 → 09:00 Registration

09:00 → 09:30 Welcome

Convener: Prof. Christof Niedermayer (Paul Scherrer Institut)

09:30 → 10:15 Plenary Session: DECTRIS

Convener: Dr Christian Brönnimann (Dectris AG)

10:15 → 10:30 Introduction to DENIM 2018

Speaker: Mr Peter Keller (Paul Scherrer Institut)

10:30 → 11:00 Coffee Break / Poster Session Sponsors

11:00 → 11:30 Plenary Session: Preparation of SINQ upgrade

Convener: Dr Uwe Filges (Paul Scherrer Institut)

11:30 → 12:00 Plenary Session: CAMEA

Conveners: Prof. Christof Niedermayer (Paul Scherrer Institut), Dieter Graf, Fabrizio Anselmi, Frank Herzog (Paul Scherrer Institut)

12:00 → 12:30 Plenary Session: IAEA Neutron Beam Instrumentation Projects

Convener: Dr Ian Swainson (International Atomic Energy Agency)

12:30 → 13:30 Lunch

13:30 → 15:00 Visit Group 1: Mechanics SINQ & ATEC

SINQ

13:30 → 15:00 Visit Group 2: Electronics SINQ

SINQ

13:30 → 15:00 Visit Group 3: SINQ, SLS & HIPA

SINQ

13:30 → 15:00 Visit Group 4: ESI-Platform

Tour2
Tour 3
Tour 4

13:30 → 15:00 Visit Group 5: Central workshop

Tour 5
Tour 2
Tour 3

13:30 → 15:00 Visit Group 6: SwissFEL

Tour 3
Tour 4
Tour 5

15:00 → 15:30 Coffee Break / Poster Session Sponsors

15:30 → 17:00 Visit Group 1: Mechanics SINQ & ATEC

SINQ

15:30 → 17:00 Visit Group 2: Electronics SINQ

SINQ

15:30 → 17:00 Visit Group 3: SINQ, SLS & HIPA

SINQ

15:30 → 17:00 Visit Group 4: ESI-Platform

Tour2
Tour 3
Tour 4

15:30 → 17:00 Visit Group 5: Central workshop

Tour 5
Tour 2
Tour 3

15:30 → 17:00 Visit Group 6: SwissFEL

Tour 3
Tour 4
Tour 5

17:00 → 17:30 Shuttle Bus to Bad Zurzach

PSI -> Bad Zurzach

Tuesday 18 September

07:30 → 08:00 Shuttle bus from Bad Zurzach

Shuttle Zurzach -> PSI

08:00 → 08:30 Parallel Session A1: Magnet simulations for polarised neutron instruments

Convener: Mr Michel Thijs (Research Technician)

08:00 → 08:30 Parallel Session A2: Control system Architecture of the JCNS Neutron Instruments

Convener: Mr Harald Kleines (Forschungszentrum Jülich, JCNS)

08:00 → 08:30 Parallel Session A3: Chopper control system integration at ESS

Convener: Andrés Quintanilla

08:30 → 09:00 Parallel Session A1: Mu-PAD - 3D neutron polarimetere at LLB

Convener: Dr Sergey Klimko (Laboratoire Léon Brillouin)

08:30 → 09:00 Parallel Session A2: First comissioning results from the ESS instrument control architecture applied to neutron scattering

Convener: Dr Nikolaos Tsapatsaris (European Spallation Source ERIC)

08:30 → 09:00 Parallel Session A3: Online alignment survey for long components hidden under shielding

Convener: Mr sébastien gautrot (CEA/CNRS LLB)

09:00 → 09:30 Parallel Session A1: Target Development of the accelerator driven neuron source HBS

Convener: Mr Paul-Emmanuel Doege (JCNS, Forschungszentrum Jülich GmbH)

09:00 → 09:30 Parallel Session A2: The IMAT Camera Positioning Robot at ISIS

Convener: Mr Jon Elmer (STFC)

09:00 → 09:30 Parallel Session A3: Pressure Safety in Vacuum Systems

Convener: Mr Van Graves (Oak Ridge National Laboratory)

09:30 → 10:00 Coffee Break / Poster Session Sponsors

10:00 → 10:30 Parallel Session B1: FuG

10:00 → 10:30 Parallel Session B2: How to relocate a Neutron Beam Instrument to the other side of the Globe - Part 2, Intallation and Commissioning

Convener: Mr Stewart Pullen (ANSTO)

10:00 → 10:30 Parallel Session B3: Advanced Sample Environment Design - An Example for SINQ instrument SANS-II A climate chamber with fast humidity and temperature response

Convener: Lothar Holitzner (Paul Scherrer Institut)

10:30 → 11:00 Parallel Session B1: How to find radiation hard components?

Convener: Mr Thomas Gahl (European Spallation Source)

10:30 → 11:00 Parallel Session B2: The design of ASTOR: A cold neutron imaging instrument for the future argentine multipurpose reactor, RA-10

Convener: Dr Aureliano Tartaglione (CONICET. Argentina)

10:30 → 11:00 Parallel Session B3: A high temperature furnace for in-situ SANS and diffraction measurements on steel samples

Convener: Mr Ernst van der Wal (TU Delft)

11:00 → 11:30 Parallel Session B1: Power supplies - for special applications, in the change over times

Convener: Mr Lothar Droll (Kniel System-Electronic GmbH)

11:00 → 11:30 Parallel Session B2: Neutron Electric Dipole Moment Measurement at SNS

Convener: Mr John Ramsey (Oak Ridge National Laboratory)

11:00 → 11:30 Parallel Session B3: 5 tons, 5 Sv/h, 2 mm tolerance - Exchanging the Plug JMA16 at FRM II

Convener: Mr Elbio Calzada (TUM - FRM II)

11:30 → 13:00 Poster Session

13:00 → 14:00 Lunch

14:00 → 15:30 Denim Challenge

15:30 → 16:00 Coffe Break / Poster Session Sponsors

16:00 → 17:30 Knowledge sharing session 1: Survey and Alignment: Survey and Alignment

Conveners: Doug Bruce (SNS), Martin Herzig (Kunz precision AG)

16:00 → 17:30 Knowledge sharing session 2: Mechanics for Positioning Systems

Conveners: Scott Olsen (ANSTO), Stephan Maag (Paul Scherrer Institut)

16:00 → 17:30 Knowledge sharing session 3: Electronics for Positioning Systems

Conveners: Claude Pascal Pradervand (Paul Scherrer Institut), Mr Stephen Cox

16:00 → 17:30 Knowledge sharing session 4: Vibration management and Optics

Conveners: Iain Sutton (ESS), Mr Uwe Flechsig (Paul Scherrer Institut)

18:00 → 18:30 Shuttle Bus to Bad Zurzach

PSI -> Bad Zurzach

Wednesday 19 September

07:30 → 08:00 Shuttle bus from Bad Zurzach

Shuttle Zurzach -> PSI

08:00 → 08:24 Parallel Session C1: POWGEN T0 Baseplate Upgrade - A Lesson in Configuration Management

Convener: David Anderson (ORNL)

08:00 → 08:30 Parallel Session C2: Seismic Design and Neutron Instrument Shielding at SNS

Convener: Jack Thomison (National Resource Management LLC / SNS)

08:00 → 08:30 Parallel Session C3: First Motion Control Commissioning at ESS on the V20 Beamline at HZB

Convener: Mr Paul Barron (ESS)

08:24 → 08:48 Parallel Session C1: Cryogenic System for the Ultra cold Neutron source (UCN source) at the FRM II, Part 1: Design, Performances and Unique Properties

Convener: Mr Johann Schilcher (Forschungs-Neutronenquelle Heinz Maier-Leibnitz FRM II, Technical University Munich)

08:30 → 09:00 Parallel Session C2: Radiation Hunting - Tools and techniques for getting your background down

Convener: Mr Olsen Scott (ANSTO)

08:30 → 09:00 Parallel Session C3: An open source software package for ESS EtherCAT Motion Control Applications

Convener: Mr Anders Sandström (ESS)

08:48 → 09:02 Parallel Session C1: Cryogenic system for the Ultra cold Neutron Source (UCN source) at the FRM II, Part 2: Main features, commissioning, opeerating, simulation and experience

Convener: Dr Christian Bocquet (Technical University of Munich)

09:00 → 09:30 Parallel Session C2: Advances in the shielding design of the cold neutron imaging instrument ASTOR

Convener: Mr Santiago Bazzana (CNEA)

09:00 → 09:30 Parallel Session C3: Radiation hard motion control components

Convener: Kristina Jurisic

09:02 → 09:26 Parallel Session C1: Design and Performance of the Solid D2 Moderator System of the UCN Facility at PSI

Convener: Dr Bertrand Blau (PSI)

09:26 → 10:00 Parallel Session C1: Robot System of the Selene Guide in ESS-ESTIA Instrument

Convener: Peter Heimgartner (Paul Scherrer Institut)

09:30 → 10:00 Parallel Session C2: Neutron spectrometry at SINQ and development of new shielding material using Bonner Sphere Spectrometer

Convener: Masako Yamada

09:30 → 10:00 Parallel Session C3: Prototyping of an Aperture changer for the NMX Instrument at ESS

Convener: Mr Paul Barron (ESS)

10:00 → 10:30 Coffe Break / Poster Session Sponsors

10:30 → 10:45 Group Picture

10:45 → 11:45 Knowledge sharing session summary

11:45 → 12:15 Plenary Session: High Brilliance Neutron Source project - development of hydrogen mixing cryostat

Convener: Dr Johannes Baggemann (Forschungszentrum Jülich)

12:15 → 12:45 Plenary Session: Lessons (un)learned

Convener: Iain Sutton

12:45 → 13:15 Plenary Session: Closing

Convener: David Anderson (ORNL)

13:15 → 14:15 Lunch

14:15 → 15:15 Annual General Meeting ISNIE

15:15 → 15:30 Bus Boarding

15:30 → 16:15 Bus to Zürich

16:15 → 18:00 Free Time at Zürich City

18:00 → 21:45 Conference Dinner

22:00 → 22:45 Shuttle Bus to PSI/Bad Zurzach