Present: N. Hiller, S. Maeder, D. Voulot
-
C. Kittel is not here we skip the HLA overview for next meeting
-
Sequencer: The general idea would be to use the existing snapshot files and add another (python?) application to filter and load sequentially specific settings.
-
Not all settings should be loaded, some should be loaded by default some should never be loaded and some should be loaded optionally.
-
K-values should normally be loaded, an option should exist to load the currents (I-SET) instead
-
Some magnets should maybe be left out (to be discussed with BD)
-
An option should exist not to cycle the magnets before loading the settings
-
Loading of laser setting (gun, LH) should be optional, maybe the feedback set-points could be reloaded instead of the laser energy set-points
-
Undulator reference orbit and all position settings (gun, X-band, QFFs, undulators) should be optional, only K_set and phase shifts should be loaded by default
-
The RF voltage should be scaled and redistributed in such a way that loading the file gives the same electron energy, this may be done via the virtual RF stations?
-
Panels showing the feedback plots (live and from archiver) will be prepared. The idea is to be able to quickly see of something was changed by the feedback without opening the FB tool or going to the archiver (Nicole).
-
An operation overview panel with selected will be prepared. It will not show each individual component but should give access to key information and panels (Nicole).
-
Laser aperture settings to be added to the main overview panel (Stefan)
There are minutes attached to this event.
Show them.
