Choose timezone

Your profile timezone:

Use timezone based on:

Event/category Custom

Select a custom timezone

Login

WPMAG EUROfusion Final Meeting

14–16 Jan 2026

Paul Scherrer Institute

Europe/Zurich timezone

Contact

Speaker List

Di Zenobio Aldo (ENEA)
- Speaker at Report on the alternative design for VNS TF coils
Achille Angrisani Armenio (ENEA)
- Speaker at AC losses and interfilament resistance measurements of unpatterned and commercially filamentized REBCO tapes
Achille Angrisani Armenio (ENEA)
- Speaker at Design and materials procurement and Critical current measurements
Nadezda Bagrets (KIT)
- Speaker at Mechanical and electro-mechanical tests
Daniel Louis Arthur Biek (EPFL)
- Speaker at Mechanical Analysis of Helias 5-B Magnet system
Gaetano Bongiovì
- Speaker at Updates on Prospective R&D
Roberto Bonifetto (05-PoliTo)
- Speaker at Thermal-hydraulic analysis on VNS TF conductor
Roberto Bonifetto (05-PoliTo)
- Speaker at Analysis of new baseline and partial- or non-insulated coils
Francois Bonne (CEA)
- Speaker at CS margin exploration with quasi isobaric loop and Cold end architecture to gain margin
Daniela Paola Boso
- Speaker at 2025 Coordination of the mechanical analysis groups in WPMAG and Preliminary engineering design of the main structures of the magnet system
Marco Breschi
- Speaker at Assessment of modelling needs and numerical tools for non-insulated or partially insulated HTS magnets
Fabio Breschi
- Speaker at Development of a synthetic database for CORC® cables
Nikolay Bykovskiy (EPFL)
- Speaker at Double pancake Design, procurement and quench testing
- Speaker at SULTAN test of Lasso 2 coil impregnated by water
Giuseppe Calabro (17-UniTuscia)
- Speaker at Scalable HTS coils for TRUST experimental fusion device: Design and Manufacturing at Tuscia University
Martina Casciello (05-PoliTo)
- Speaker at Thermohydraulics analysis of the cooling system of TF coils
Valentina Corato (ENEA)
- Speaker at Update on WPMAG
Gianluca De Marzi (ENEA)
- Speaker at EU-CN:Coupling losses in HFRC and sector-shaped HTS cables.
Ivan Duran (IPP.CR)
- Speaker at Report om HTS neutron irradiation studies - 2025
Michael Eisterer (OEAW)
- Speaker at Radiation tolerance of technical superconductors
Giorgetti Francesco (ENEA)
- Speaker at Advanced finite element modeling to support the experimental test
Silvia Garitta (CEA)
- Speaker at 3D Mechanical Modelling of the DEMO Low Aspect Ratio TF coil 2025
Manuel Garzia Munoz (Uni. Seville)
- Speaker at HTS model coil activity at University of Seville
Lorenzo Giannini
- Speaker at Update on DCT
Fedor Goemoery (CU)
- Speaker at Investigation of AC loss in filamentized coated conductor tapes 4 mm and 12 mm wide, with the filaments of 500 µm and 250 µm, prepared by industrial process
Jack Greenwood (EPFL - EPF Lausanne)
- Speaker at CS coil preconceptual design and electromagnetic analysis for the 2024 DEMO baseline
- Speaker at Manufacture of the EDIPO II subscale coil
- Speaker at Mechanical analysis of the 2024 CS coil designs (SPC variant)
Corrado Groth (04-UnivTorVergata)
- Speaker at Preliminary clamp design and submodeling for TF Busbars
Richard Kamendje
- Speaker at Updates on EU-CN collaboration
Benoit Lacroix (CEA)
- Speaker at Deliverable on 2025 CEA thermo-hydraulic analyses – Impact of hydraulic boundary conditions on CS operation
Francesco Laviano (05-PoliTo)
- Speaker at Measurements with the Magneto-Opical Imaging with an Indicator Film (MOIF) of REBCO tapes
Quentin Le Coz (CEA)
- Speaker at Deliverable on 2025 CEA magnetization test activities.
Quentin Le Coz (CEA)
- Speaker at Deliverable on 2025 CEA thermo-hydraulic analyses
Federico Ledda
- Speaker at Impact of neutron and secondary radiation on HTS determined by Monte Carlo and atomistic simulations
- Speaker at MC simulations of the neutron volumetric load on TF coils
Monika Lewandowska (03-WPUT)
- Speaker at EU-CN Analysis of AC losses and thermal – hydraulic simulations (2025)
- Speaker at Hydraulic tests
- Speaker at Thermal – hydraulic analysis of the DEMO winding packs (2025)
Min Liao (UKAEA)
- Speaker at Presentation on collaboration activities at UKAEA
Antonio Maffucci
- Speaker at 2025 Theoretical studies on the quench detection system
Andrea Masi (ENEA)
- Speaker at EU-CN: Preliminary test in LN2_2025
Giuseppe Messina (ENEA)
- Speaker at Investigation of the voltage distribution across and within each TF coil during various electrical transients
Thomas Nes (PSI - Paul Scherrer Institut)
- Speaker at Mechanical analysis of the 2024 PF coil designs (SPC variant)
- Speaker at PF coil preconceptual design and electromagnetic analysis for the 2024 DEMO baseline
Clément Nguyen Thanh Dao (CEA)
- Speaker at HTS SULTAN Design and manufacturing
- Speaker at WP4 SULTAN Design and manufacturing
Sylvie Nicollet (CEA)
- Speaker at Deliverable on Coordination of Thermal-Hydraulic Analysis
Arend Nijhuis (01-UT)
- Speaker at EU-CN: Electromagnetic-Mechanical Modelling of CS ReBCO CORC-CICC 2025
- Speaker at EU-CN: REBCO tape mechanical loading tests and Ic
Arend Nijhuis
- Speaker at CORC-CICCs Ic and Rc under 77K cyclic loading in Twente Press
Mattia Ortino (PSI - Paul Scherrer Institut)
- Speaker at Continuation of the TF coil design with SMART insulating materials
- Speaker at SULTAN test of ENEA HTS sample SECAS 1
Rafal Ortwein (07-IFJ PAN)
- Speaker at MAG-S.01.04-T022-D001
Valentina Pinto (ENEA)
- Speaker at Feasibility study of the system for transport measurements during cryogenic gamma irradiation
Teresa Puig (CIEMAT)
- Speaker at Presentation on the irradiation activity at CIEMAT-CSIC
Xabier Sarasola (EPFL - EPF Lausanne)
- Speaker at Cabling of various RW cable prototypes
- Speaker at Manufacture of the C-profiles and production of approx. 3 times 100 m empty jacketfor laser welding demonstration
Laura Savoldi (05-PoliTo)
- Speaker at Lumped parameter circuit model for hysteresis losses in sector shaped HTS cables.
Kamil Sedlak (EPFL)
- Speaker at Welcome
Ion Tiseanu (01-NILPRP)
- Speaker at EU-CN: X-ray microtomography analysis of full-length HTS conductor prototype and electrical termination samples developed under the EU-China collaboration
- Speaker at X-ray Tomography Analysis of Short-Length HTS DEMO Conductors with different architectures
Alexandre Torre (CEA)
- Speaker at Deliverable on 2025 CEA electromagnetic calculations – Magnetic field calculations on hybrid HTS/LTS and ITER-like CS designs, and update of TF WP#4 (new baseline).
- Speaker at Deliverable on 2025 CEA Industrial study and conductor procurement
- Speaker at Deliverable on 2025 CEA TF-WP4 and CS designs
- Speaker at EU-CN: Deliverable on 2025 CEA CORC Conductor Performances Analyses
Angelo Vannozzi (ENEA)
- Speaker at Purchase of a FIB-SEM equipped with EDS, EBSD and laser ablation chamber.
Klaus Weiss (KIT)
- Speaker at EU-CN: Survey and tests on stainless steel
Andrea Zappatore (05-PoliTo)
- Speaker at Model and analysis of quench experiments in SULTAN.
Andrea Zappatore (Politecnico di Torino)
- Speaker at EU-CN: Model and analysis of HTS performance degradation after quench.