Conveners
Wed -3
- Takeyasu Ito (Los Alamos National Laboratory)
Description
Precise magnetic field measurement methods of small magnetic fields, vapor-based magnetometers, magnetometer calibration methods, detection and measurment of magnetic contaminations
-
Amala Jaison (University of Manitoba)02/09/2026, 20:00Oral Presentation
Magnetic-field uniformity is a critical requirement for neutron electric dipole mo-
Go to contribution page
ment (nEDM) experiments, where magnetic-field gradients can reduce neutron spin
coherence and contribute to systematic frequency shifts. The TUCAN (TRIUMF Ultra
Cold Advanced Neutron) EDM experiment at TRIUMF requires a stable and homoge-
neous magnetic-field environment for precision neutron... -
Steven Clayton (Los Alamos National Laboratory)02/09/2026, 20:25Oral Presentation
A magnetic impurity scanner was developed to qualify components for the magnetically shielded environment of the Los Alamos nEDM experiment. The scanner uses a turntable on an air bearing to move samples under a magnetometer which itself can be moved to different turntable radii with a gantry robot. This is all contained within a small magnetically shielded room. This presentation will go over...
Go to contribution page -
Cameron Blake Erickson (PSI - Paul Scherrer Institut)02/09/2026, 20:50Oral Presentation
Modern neutron electric dipole moment experiments require high precision characterization of magnetic fields to adequately control systematic uncertainties. The measured magnetic fields are modeled by an expansion that practically must assume a finite order and often that the experimental volume is free of magnetic sources. Magnetic contamination, defined as unintended magnetic fields...
Go to contribution page -
Sylvain Vanneste (Johannes Gutenberg University Mainz)02/09/2026, 21:15Oral Presentation
In order to precisely understand and characterise UCN behaviour after production at the Paul Sherrer Institute, transport, storage, and finally detection in the n2EDM experiment, a tailored simulation framework is being developed using the PENTrack software. In addition, two custom-made packages are being developed, that facilitate the configuration and analysis of those simulations. The...
Go to contribution page