15–16 Sept 2011
Paul Scherrer Institut, Villigen, Switzerland
Europe/Zurich timezone

Trace elements in PM10, PM2.5 and PM1.0 aerosols

16 Sept 2011, 13:39
2m
WSLA - Foyer (Paul Scherrer Institut, Villigen, Switzerland)

WSLA - Foyer

Paul Scherrer Institut, Villigen, Switzerland

Board: 102
Poster Poster Session II (Friday) Poster session II and lunch

Speaker

Ms Suzanne Visser (MSc)

Description

Suzanne Visser (PSI), M. Furger (PSI), U. Flechsig (SLS,PSI), K. Appel (DESY), A. S. H. Prevot (PSI) and U. Baltensperger (PSI) Ambient aerosol samples were taken in several megacities (e.g. Paris, Los Angeles) with a Rotating Drum Impactor (RDI). The RDI sampled aerosol particles with a volumetric flow of 16.6 l min-1 (1 m3 h-1) and particle size segregation in the ranges of 10-2.5 μm, 2.5-1.0 μm and 1.0 to approximately 0.1 μm (Richard et al. 2010). Sampling time was 2 hours. Subsequently, the elemental composition was analyzed using synchrotron radiation induced X-ray fluorescence spectrometry (SR-XRF) at the X05DA beamline (elements with Z = 13-30; Al-Zn) at the Swiss Light Source and at the beamline L (elements with Z = 24-82; Cr-Pb) at HASYLAB at DESY. Raw counts per element were calibrated using external reference standards on thin foils measured with the same beamline setup (Bukowiecki et al. 2005 and Richard et al. 2010). The elemental composition of aerosols is used to identify the spatial and temporal variability of emission sources in megacities. Bukowiecki et al. Environ. Sci. Technol. 39, 5754-5762 (2005). Richard et al. Atmos. Meas. Tech. 3, 1473-1485 (2010).

Please specify poster or talk

poster

Please specify the session

Advancing Quantitative Chemical Imaging

Primary author

Ms Suzanne Visser (MSc)

Co-authors

Dr Markus Furger (Dr) Prof. Urs Baltensperger (Prof)

Presentation materials

There are no materials yet.