9–12 May 2012
PSI
Europe/Zurich timezone

Session

Technology

11 May 2012, 15:15
Auditorium (PSI)

Auditorium

PSI

Conveners

Technology

  • Sytze Brandenburg (Kernfysisch Versneller Instituut)

Presentation materials

There are no materials yet.

  1. Dr Antonio Bulgheroni (EC - JRC)
    11/05/2012, 15:15
    Talk
    The application range of manufactured nanomaterials is steadily increasing, as is their use in industry and consumer products. In parallel, there is growing concern about the safety of these materials. Radiolabelling techniques are extremely sensitive and useful tools for tracing studies to assess the fate of nanoparticles and possible risks for human health and environment arising from the...
    Go to contribution page
  2. Mr Sébastien Henrotin (IBA)
    11/05/2012, 15:40
    Talk
    IBA will equip its new superconducting synchrocyclotron (S2C2) with an internal PIG ion source. This choice is motivated by the source compactness, simplicity and cost but is not easy to implement in the present case. As an example, the high magnetic field and central region turn pattern imply the use an extremely thin chimney. Therefore, experimental design validation and testing is...
    Go to contribution page
  3. Mr Michel Abs (IBA)
    11/05/2012, 16:05
    Talk
    The IBA famous Cyclone 30 has been recently upgraded in order to not only accelerate protons but also deuterons and alpha particles. For efficient acceleration and easier central region design all the particles are accelerated along the same turn pattern, on the same harmonic mode. Consequently, the RF cavities must be resonating on two different frequencies. In order to provide a simple,...
    Go to contribution page
  4. Dr Hannu Koivisto (Department of Physics, University of Jyväskylä (JYFL))
    11/05/2012, 16:30
    Talk
    The transmission efficiency measurements of the JYFL accelerator facility were started in 2007. The motivation towards the studies was the fact that after a certain limit the beam intensity after the cyclotron did not increase with the beam intensity extracted from the JYFL 14 GHz ECRIS. Instead, the accelerated beam intensity reaches a saturation value and even starts to decrease if the total...
    Go to contribution page
Building timetable...