Beam Dynamics meets Magnets-II

1 Dec 2014, 08:00 → 4 Dec 2014, 12:30 Europe/Zurich

Bad Zurzach

Andreas Co-Chair Streun (Paul Scherrer Institut), Stephane Sanfilippo (Paul Scherrer Institut)

BeMa 2014

This meeting is organized by the EuCARD2 XBEAM-XRING Network. This is the second workshop involving the communities of beam dynamics experts and magnet engineers. This particular workshop brings together two different accelerator communities, those working on HEP circular colliders and those working on machines using low emittance lattices such as synchrotron light sources and Free Electron Lasers. This workshop will focus on discussions about the main technological problems of these types of accelerators with the aim of promoting interactions amongst people in various labs and institutions and so favoring a better understanding of the mutual needs of beam dynamics experts and magnet engineers.  The content of the workshop will use concrete projects, realized in the past, or in development now, to clarify the common requirements in the theoretical, experimental and design areas and thus to build bridges between different research activities.  Through talks by physicists and engineers from various projects we will compare their lines of development, discover the different aspects of their next challenges and encourage international synergies. The workshop will profit from the experiences of colleagues who have designed, built and commissioned existing facilities and from the concerns of colleagues involved in the R & D of similar future accelerators.
 
The format will be a discussion workshop rather than a mini-conference.  The workshop will be composed of oral contributions and will address the following topics:

• Beam dynamics requirements and design challenges for accelerator magnets  and insertion devices
• Beam based alignment and magnet fiducialisation
• Magnet specifications and field measurement limitations
• Upcoming challenges in magnet technology for Free Electron Lasers
• Achievements and challenges in the interactions between  magnet design and beam dynamics

The meeting will take place in the Park-Hotel, Bad Zurzach, (near Zurich), Switzerland from 1st to 4th of December 2014.  You are invited to present your proposal for a workshop talk to the chairmen of the workshop or to any member of the International Advisory Committee by October 1^st  2014.

Thanks to our sponsors, we will start the workshop with a welcome reception on Sunday, 30 November 2014, at 18:00. The registration will be open at the same time.

 

Monday 1 December

08:30 → 12:20 Future directions

Convener: Hans-Heinrich Braun (Paul Scherrer Institut)

08:30 Welcome and opening remarks

Speakers: Andreas Streun (Paul Scherrer Institut), Stephane Sanfilippo (Paul Scherrer Institut)

Slides Wecome_opening_remark.ppt Welcome_and_opening_remarks.pdf

08:55 Challenges for Future Circular Colliders

Speaker: Frank Zimmermann (CERN)

Slides ChallengesForFutureCircularColliders-1Dec2014_FrankZimmermann.pptx

09:20 Establishing C3, the Coherence between Accelerator Physics Requirements, Magnet Manufacture, and Magnetic Field Measurements

Speaker: Stephan Russenschuck (CERN)

Slides 03_Stephan_Russenschuck.ppt

09:45 Fixed Field Alternating Gradient accelerator: the future challenges

Speaker: Shinji Machida (STFC RAL)

Slides machida20141201-2.pdf

10:10 Coffee break

10:40 Beam dynamics and magnet design challenges for the next generation of free electron lasers

Speaker: Luca Giannessi (ENEA and Elettra-Sincrotrone Trieste)

Slides 05_Luca_Giannessi.pptx

11:05 Beam quality for high brightness beam: Application of SwissFEL

Speaker: Sven Reiche (Paul Scherrer Institut)

Slides Beam_Brightness.key Beam_Brightness.pdf

11:30 Beam dynamics and magnet design challenges for 4th-generation storage ring light sources

Speaker: Michael Borland (Argonne National Laboratory)

Slides Borland-4GSRMagnets-V5.pdf

11:55 Beam dynamic and lattice proposal for the SLS 2.0

Speaker: Andreas Streun (Paul Scherrer Institut)

Slides BeMa2_streun.pdf BeMa2_streun.pptx

12:20 → 13:50 Lunch break

13:50 → 17:40 Medical applications

Convener: Jacobus Maarten Schippers (Paul Scherrer Institut)

13:50 Design options for highly compact, superconducting cyclotrons and gantry magnets for hadron therapy

Speaker: Joseph Minervini (Massachusetts Institute of Technology)

Slides Minervini_BeMa-II.pdf Minervini_BeMa-II.pptx

14:10 Magnets meet beams in gantries for medical application -1

Speaker: Shlomo Caspi (Lawrence Berkeley National Laboratory)

Slides BeMa2014-Caspi-Brouwer-Dec-01-Rev7Part1and2.pptx

14:30 Magnets meet beams in gantries for medical application -2

Speaker: Lucas Brouwer (Lawrence Berkeley National Laboratory)

14:50 Development of a superconducting gantry for the Carbon therapy

Speaker: Yoshiyuki Iwata (National Institute of Radiological Sciences (NIRS))

Slides BeMa14-SCG-Iwata.pptx

15:10 Innovative developments at the facility for the proton therapy at PSI: beam delivery systems with SC magnets

Speaker: Jacobus Maarten Schippers (Paul Scherrer Institut)

Slides

• Schippers-Magnetworkshop20141201.pdf
• Schippers-Magnetworkshop20141201.ppt
• Schippers-Magnetworkshop20141201.ppt

15:30 Coffee break

16:00 Beam Optics for a superconducting Gantry

Speaker: Alexander Gerbershagen

Slides Beam_optics_for_a_superconducting_gantry.pptx

16:20 Challenges to design and test fast ramped superconducting dipole magnet

Speaker: Pasquale Fabbricatore (INFN Sezione di Genova)

Slides Presentation_rev.ppt

16:40 Jefferson Lab CLAS12 Super-Conducting Solenoid magnet requirements and Design Evolution

Speaker: Renuka Rajput-Ghoshal (Jefferson Lab)

Slides BeMa2014_Talk_RRG_Final.pptx

17:00 Discussion

Tuesday 2 December

08:30 → 12:20 Magnets and undulators for light sources 1

Convener: Dieter Einfeld (MAX-Lab)

08:30 Magnet Alignment Challenges for an MBA Storage Ring

Speaker: Animesh Jain (Brookhaven National Laboratory)

Slides BeMa2014_Alignment_Jain.pdf BeMa2014_Alignment_Jain.pptx

08:50 Overview of the Beam Based Alignment techniques

Speaker: Riccardo Bartolini (JAI Oxford and DLS)

Slides 02_Riccardo_Bartolini.ppt

09:10 Beam Based Alignment techniques for linacs

Speaker: Masamitsu Aiba (Paul Scherrer Institut)

Slides BeMa2014_aiba.pptx

09:30 Small aperture magnets for the Light Sources: beam specifications meets design and construction

Speaker: Ben Leigh (Tesla Engineerign Ltd.)

Slides Practical_aspects_of_small_aperture_quadrupoles_BeMa2104_FINAL.pptx

09:50 Design of the magnets for the MAX IV project

Speaker: Martin Johansson (MAX IV Laboratory)

Slides 05_Martin_Johansson.pptx

10:10 Coffee break

10:40 Vacuum system for MAX IV

Speaker: Pedro Fernandes Tavares (MAX IV LABORATORY)

Slides 06_P_F_Tavares.pptx

11:00 Experience in the design, construction and tests of small aperture magnets for the Light Sources

Speaker: William Beeckman (Sigmaphi)

Slides schori_h

11:20 Magnets for the SwissFEL: from beam specifications to magnetic tests

Speaker: Marco Negrazus (PSI)

Slides 08_Marco_Negrazus.pptx

11:40 Discussion

12:20 → 13:50 Lunch break

13:50 → 17:20 Magnets and undulators for light sources 2

Convener: Thomas Schmidt (Paul Scherrer Institut)

13:50 The ZEPTO project: tunable permanent magnet dipoles and quadrupoles

Speaker: Ben Shepherd (STFC Daresbury Laboratory)

Slides 14-12-02_Shepherd_-_ZEPTO_-_BeMa_Workshop.pptx

14:10 Magnets and insertion devices for the ESRF upgrade

Speaker: Joel Chavanne (ESRF)

Slides 02_Joel_Chavanne.pdf

14:30 Summary of the 2014 Superconducting Undulator Workshop

Speaker: Jim Clarke (STFC Daresbury Laboratory)

Slides Clarke_-_SCU_Workshop.pptx

14:50 Superconducting technologies for Light Source undulators

Speaker: Soren Prestemon (LBNL)

Slides Prestemon-BeMa-SCUs.pdf Prestemon-BeMa-SCUs.pptx

15:10 Superconducting undulators: Experience from ANKA

Speaker: Sara Casalbuoni (ANKA, KIT)

Slides Casalbuoni_BeMa2014.pdf

15:30 Coffee break

16:00 FEL undulators: from beam specifications to magnetic measurements

Speaker: Dr Marco Calvi (Paul Scherrer Institut)

Slides BeMa_2014_Marco_Calvi.pptx

16:20 Design of the permanent undulators for the Linac Coherent Light Source Facility II

Speaker: Diego Arbelaez (LBNL)

Slides Arbelaez_BEMA2.pptx

16:40 Discussion

Wednesday 3 December

08:10 → 09:00 Bus transfer to PSI

Meeting point:
8:10 at the Hotel entrance

09:00 → 12:30 PSI visit

09:00 Overview of the activities at the Paul Scherrer Institut

Speaker: Mike Seidel (Paul Scherrer Institut)

Movie FastEnergyChangeDVD.wmv

Slides 01_Mike_Seidel.pptx

09:30 SwissFEL, the hard X-ray FEL at PSI: overview and perspectives

Speaker: Hans-Heinrich Braun (Paul Scherrer Institut)

Slides BEMA141203V2.pptx

10:00 Coffee break

10:30 PSI Tour

12:30 → 12:45 Workshop Photo

12:45 → 13:30 Lunch break

13:30 → 14:00 Coffee and dessert

14:00 → 17:50 Magnet design, modelling and measurements 1

Convener: Cherrill Spencer (SLAC National Accelerator Laboratory (retired from))

14:00 Technology challenges in high field magnets for LHC upgrades and future accelerators

Speaker: Luca Bottura (CERN)

Slides 01_Luca_Bottura.pptx

14:40 Dynamic aperture and field quality errors

Speaker: Frank Schmidt (CERN)

Slides BeMa14_fs_beams_03.12.2014.pptx

15:00 Experience with the KEKB/SuperKEKB magnet fabrication and measurements

Speaker: Mika Masuzawa (KEK)

Slides mmasuzawa.pptx

15:20 Magnetic measurement techniques and systems for small and curved aperture magnets

Speaker: Marco Buzio (CERN)

Slides 2014_-_MM_for_small_gap_curved_magnets.pptx

15:40 Coffee break

16:10 Rotating coil measurement errors

Speaker: Animesh Jain (Brookhaven National Laboratory)

Slides BeMa2014_RotCoilError_Jain.pdf BeMa2014_RotCoilError_Jain.pptx

16:30 The new three axis Hall sensor of SENIS

Speaker: Dragana Popovic Renella (SENIS)

Slides BeMa2014_29112014_Popovic_-_final.pdf

16:50 Status of the nonlinear beam dynamics in SIS100

Speaker: Giuliano Franchetti (GSI)

Slides 08_Giuliano_Franchetti.pptx

17:10 SIS100 Dipole Magnets: Field Measurements and Representation

Speaker: Pierre Schnizer (GSI Helmholtzzentrum für Schwerionenforschung mbH)

Slides 09_Pierre_Schnizer.pdf

17:30 Bent combined function bending magnets and optics: the case of SESAME

Speaker: Attilio Milanese (CERN)

Slides 2014_12_03_SESAME_dipole_and_optics.pptx

17:50 → 23:00 Workshop dinner

Thursday 4 December

08:30 → 11:20 Magnet design, modelling and measurements 2

Convener: Stephan Russenschuck (CERN)

08:30 Track: an accurate ray-tracing tool for magnet development at PSI

Speaker: Vjeran Vrankovic (PSI)

Slides bema.pdf

08:50 Analytic design of the fringe field of the lattice magnets

Speaker: Bruno Muratori (Daresbury Laboratory and Cockcroft Institute)

Slides fringe_fields.pptx

09:10 Fringe field modeling for large aperture quadrupole

Speaker: Barbara Dalena (CEA-Saclay DSM/Irfu/SACM)

Slides fringefields_bdalena_Zurzach.pdf fringefields_bdalena_Zurzach.pptx

09:30 Magnetic and Optical Model for the Proton Synchrotron at CERN

Speaker: Simone Gilardoni (CERN)

Slides BE_MA_gilardoni.pptx

09:50 FIDEL: the model to predict the magnetic state of the LHC

Speaker: Nicholas Aquilina (University of Malta)

Slides BeMa_2014_presentation.pptx

10:10 Coffee break

10:40 Discussion

11:20 → 12:20 Summaries

11:20 Summary talks Medical

Speaker: Jacobus Maarten Schippers (Paul Scherrer Institut)

Slides schori_h

11:40 Summary talks Magnet and undulator for light sources

Speakers: Dieter Einfeld (MAX-Lab), Thomas Schmidt (Paul Scherrer Institut)

Slides 03_Summary-Magnets_for_light_sources.pptx Summary Undulators for light sources

12:00 Summary talks Magnet design, Modelling and measurements

Speakers: Cherrill Spencer (SLAC National Accelerator Laboratory (retired from)), Stephan Russenschuck (CERN)

Slides

• schori_h
• schori_h
• SpencerSummaryBeMa2014r1.pptx

12:20 → 12:30 End of workshop

Acknowledgment / Farewell